How to Use: 1. Respectively connect the "+" and "‑" of the battery to the red wire of the controller and the negative pole black wire of the battery. 2. Respectively connect the green wire of the controller 3 phase AC voltage input wire to the 3 phase voltage output wire of the wind generator. Specification: Item Type: Wind Turbine Generator Controller Product Model: FW10-24 Rated Battery Voltage: 24V Wind Generator Rated Power: 1000W Wind Generator Braking Voltage: 30V Wind Generator Recover Voltage: 27V Quiescent Current: ≤15mA Protection Level: IP67 Working Temperature: -35℃-+75℃ Shell Size: Approx. 150 x 132 x 48mm / 5.9 x 5.2 x 1.9in Package List: 1 x Wind Generator Controller Note: 1. Confirm that the output voltage of the wind turbine is consistent with the rated voltage of the battery. 2. Connect according to the wiring diagram, first connect the positive and negative poles of the battery, and then connect the 3 phase voltage output of the wind turbine. 3. Please carefully follow the user manual to connect the battery and wind generator to the controller. If you do not connect the battery and the wind generator as required, the reverse polarity or the wrong position will cause damage to the system components. 4. It is strictly forbidden to connect the controller directly to the wind generator before connecting the battery!